PRESONUS Revelator io24 Owner's Manual page 31

3
Universal Control
TheLaunchWindow
3.1
Block Size (Windows only). Sets the buffer size. From this menu, you can set the
buffersize from 64to 8,192 samples.Loweringthe buffersize will lowerlatency,
which is the amount of time it takes for your audio to go from Revelator io24 to
the computer and back to your ears; however, this will also increase performance
demands on your computer.In general,you will want to setthe buffersize as low
asyour systemcansafelysupport.Ifyoubegintohear pops,clicks,ordistortion
in your audio path, try raising the buffer size.When adjusting the block size,
the Safe mode will automatically change to provide the best performance.
块大小（仅限Windows）。设置缓冲区的大小。从这个菜单中，您可以设置64到8192个
样本的缓冲区大小。降低缓冲区大小会降低延迟，也就是音频从Revelator io24到电脑再
到您的耳朵所需的时间；但是，这也会增加对电脑的性能要求。一般来说，可以把缓冲
区的大小设置到您的系统可以安全支持的最低限度。如果您开始听到音频路径中的爆
音、咔嗒声或失真，请尝试提高缓冲区大小。当调整块大小时，安全模式将自动改变为
提供最佳性能。
PowerUser Tip:YourRevelatorio24 features built-in zero-latencymonitoring so youcan
leave yourBlock Size high and the performance demandson yourcomputerlow.In
general,youcanuse the defaultblocksize,but if you'reusingan older computerthat is
havingtroublekeepingup,goaheadandraisethissetting.Experimenttofindwhat
works best for you!
高级用户提示：您的 Revelator io24 具有内置的零延迟监控功能，所以，可以让您的块
大小保持在较高的水平，而对您计算机的性能要求较低。一般来说，可以使用默认的区
块大小，如果您使用的是一台旧的电脑，很难跟上，可以继续提高这个设置。尝试找到
最适合您的方法。
Revelator io24
Owner'sManual
26