PRESONUS Revelator io24 Owner's Manual page 96

7
AdvancedFeaturesandCustomizationTools
Advanced FatChannel andVoice Effects Controls
7.2
Class-A FETCompressor 场效应管压缩机
1.开/关。开启或关闭信号链中的压缩机。
2.输入增益。设置压缩机的输入增益。这个设置会影响到压缩机的动作，所以请随意尝试各种设置，以找到适合
您需要的最佳效果。
3.输出增益。设置应用于信号的"构成增益"的数量。一旦一个信号被压缩，它的整体水平通常会降低。这种增益
控制可以让您在压缩发生后将其恢复到适当的水平。
4.袭击。设置信号一旦超过阈值，压缩机开始衰减所需的时间。
5.版本。设置信号一旦低于阈值，压缩机停止衰减所需的时间。
1. On/Off. Turns the Compressor on or off in the signal chain.
2. InputGain.Sets input gain to the compressor.This setting
affectstheactionofthecompressor,sofeelfreetotryvarious
settings to find the optimal effect for your needs.
3. OutputGain. Sets the amount of"make up gain"to applyto a signal.
Once asignaliscompressed,itsoveralllevelisoftenreduced.Thisgain
control lets you bring it back up to the proper level after compression
occurs.
4. Attack.Sets thetimeittakesforthecompressorto begin
attenuating a signal once it passes the threshold.
5. Release.Setsthetimeittakesforthecompressortostop
attenuating a signal once it falls below the threshold.
Revelator io24
Owner'sManual
91