Location Of Controls; Direct Operation - Lopi ProBuilder 24 CleanFace GSR2 Manual

8

Location of Controls

Direct Operation

The fireplace may be directly operated from the battery holder. The three positions are shown below:
ON (all the way left)– Burner turns on (regardless of transmitter settings).
OFF (all the way right) – Burner turns off (regardless of transmitter settings).
REMOTE (middle position) – Burner is controlled by the transmitter.
NOTE: When the battery holder switch is turned to ON or OFF, the mode settings will remain in the same
state as before the switch was moved (i.e.: the IFC "remembers" the last setting). If you wish to adjust the
mode settings use the transmitter mode button to adjust the settings (see "Mode Controls" on page 12).
The thermostat and burner on/off operating functions will not work on the transmitter.
© Travis Industries
Operation
5/3/21 - 1529 PB 24 CF GSR2 Operation (AUST)