Mode Controls - Continued; Emberbed Light (Aux); Display Fahrenheit Or Celsius; Low Battery Indicator - Lopi ProBuilder 24 CleanFace GSR2 Manual

Mode Controls - continued

EmberBed Light (AUX)

The emberbed light may be turned on and off using the up and down buttons (see illustration below). You
can adjust the brightness of the emberbed light using the built-in rheostat.

Display Fahrenheit or Celsius

 With the system in the "OFF" position, press both the MODE and THERMOSTAT buttons
simultaneously to toggle between Fahrenheit (F) and Celsius (C).

Low Battery Indicator

Transmitter Batteries

The transmitter has a battery-level indicator. When it indicates low battery voltage (see
three new AAA alkaline batteries into the transmitter (see "Battery Replacement" on page 14).

IFC Batteries

The IFC (Integrated Fireplace Control) will "beep" twice when a transmitter button is pressed when the
batteries are low. Install four new AA alkaline batteries into the battery box when this occurs (see
"Battery Replacement" on page 14). In applications where the appliance is required to provide heat, we
recommend replacing the batteries before each heating season.
© Travis Industries
Operation
5/3/21 - 1529
below), install
Figure 11
Figure 11
PB 24 CF GSR2 Operation (AUST)
13