Location Of Controls; Direct Operation - Lopi 564 GSR2 25K CF Deluxe Manual

8

Location of Controls

Direct Operation

The fireplace may be directly operated from the battery holder. The three positions are shown below:
ON (all the way left)– Burner turns on (regardless of transmitter settings).
OFF (all the way right) – Burner turns off (regardless of transmitter settings).
REMOTE (middle position) – Burner is controlled by the transmitter.
NOTE: When the battery holder switch is turned to ON or OFF, the mode settings (Flame Height, Comfort
Control) will remain in the same state as before the switch was moved (i.e.: the IFC "remembers" the last
setting). If you wish to adjust the mode settings use the transmitter mode button to adjust the settings
(see "Mode Controls" on page 12). The thermostat and burner on/off operating functions will not work on
the transmitter.
© Travis Industries
Operation
5/3/2021 - 1509 564 25k GSR2 Op Man Aust