Ember Bed Glass And Ember Material Installation; Ember Bed Glass Installation - Lopi ProBuilder 24 CleanFace GSR2 Manual

26

Ember bed Glass and Ember Material Installation

Ember bed Glass Installation

The Ember-Glo™ lights come standard on the GSR2 units. Make sure the ember skirt is in place. The skirt
hooks over the front of the ember platform and slopes outward toward the glass. The skirt helps keep the
glass and ember material from falling off the platform when the glass is removed.

Locate the perforations in front of the log grate.

Place a thick layer of the ember glass over the perforations making sure to cover all of the holes
completely.

Lightly dress the ember glass with the black touch-up paint provided. Check the appearance with the
lights on and add additional paint, as needed, for a realistic glowing ember appearance.
NOTE: If power is supplied to the fireplace it can help to turn the lights on while painting so you can
determine an appropriate amount of paint for a realistic ember appearance.
NOTE: We recommend that you use a piece of paper, cardboard as a shield to mask the log grate and
burner from overspray (see below).
© Travis Industries
Maintenance
5/3/21 - 1529 PB 24 CF GSR2 Operation (AUST)