Travis Industries; Mode Controls (Continued); Accent Light; Display Fahrenheit Or Celsius - Lopi 6015 HO Owner's Manual

Mode Controls (continued)

Accent Light

The Accent Light (night light) inside the heater may be turned on and off using the up and down buttons
when in Accent Light mode (see Figure 13). The center display will display the 7 settings, from "OFF" to
"HI" for full on.
When in accent light
mode, this icon will
appear darkened.
HINT: If you wish to leave the accent light on while turning the burner off, adjust the Flame Height
setting to "OFF" (see above).

Display Fahrenheit or Celsius

 With the system in the "OFF" position, press both the MODE and THERMOSTAT buttons
simultaneously to toggle between Fahrenheit (F) and Celsius (C).

Low Battery Indicator

Transmitter Batteries

The transmitter has a battery-level indicator. When it indicates low battery voltage (see Figure 14 below),
install three new AAA alkaline batteries into the transmitter (see "Battery Installation" on page 14).

IFC Batteries

The IFC (Integrated Fireplace Control) will "beep" twice when a transmitter button is pressed when the
batteries are low. Install four new AA alkaline batteries into the battery box when this occurs (see "Battery
Installation" on page 14). In applications where the appliance is required to provide heat, we recommend
replacing the batteries before each heating season.
© Travis Industries
Operation
F
This is the accent light
OFF
read-out. Use the up
or down buttons to
adjust the accent light
brightness (7 settings).
MAX
Low Battery Indicator
OFF
MAX
Figure 12
F
F
Figure 14
4131220
F
C
Figure 13
13
High
Medium
Off
100-01371