Table of Contents
Advertisement
Mode Controls - continued
Accent Light
The Accent Light (night light) inside the heater may be turned on and off using the up and down buttons
when in Accent Light Mode (see illustration below). The center display will display the 7 settings, from
"OFF" to "HI" for full on.
HINT: If you wish to leave the accent light on while turning the burner off, adjust the Flame Height to
"OFF" (see above).
Comfort Control (rear burner)
The comfort control (rear burner) may be turned on and off using the up and down buttons when in
Comfort Control Mode (see illustration below). The center display will display either "ON" or "OFF".
EmberBed Light (AUX)
The emberbed light may be turned on and off using the up and down buttons (see illustration below). You
can adjust the brightness of the emberbed light using the built in rheostat.
Display Fahrenheit or Celsius
With the system in the "OFF" position, press both the MODE and THERMOSTAT buttons
simultaneously to toggle between Fahrenheit (F) and Celsius (C).
© Travis Industries
Operation
5/3/2021 - 1509
13
564 25k GSR2 Op Man Aust
Advertisement
Table of Contents
