Table of Contents
Advertisement
Chapter 6: Troubleshooting
Non-system disk or disk error
■
Eject the diskette, then press E
■
If the diskette is bootable, check it for errors with an error-checking
program.
■
For troubleshooting information, see
hard drive" on page
Not enough memory
■
Close all programs that are not currently in use.
Required parameter missing
■
Make sure that you entered the right command.
■
If you are trying to exit DOS to return to Windows, type exit, then press
E
NTER
Syntax error
■
Make sure that you entered the right command.
■
If you are trying to exit DOS to return to Windows, type exit, then press
E
NTER
System Event Log Full
■
Clear the event log. To clear or view the event log, open the BIOS Setup
utility, select the
For information on opening the BIOS Setup utility, see
Setup utility" on page
Time and date not set
■
Open the BIOS Setup utility, then set the computer date and time.
Write-protect error
■
Your diskette is write-protected. Move the write-protection tab over the
window on the back of the diskette.
98
107.
.
.
Advanced
88.
www.gateway.com
.
NTER
"You need to troubleshoot an IDE
menu, then select the
menu.
Event Log Control
"Opening the BIOS
Advertisement
Table of Contents
Troubleshooting
