Connecting To A Garmin Vhf Comm Radio - Garmin GPSMAP 695 Owner's Manual

appendix d

cONNectiNG tO a GarMiN vhF cOMM radiO

The GPSMAP 695/696 can also output frequency data to a Garmin aviation radio.
Currently the two models supported are the SL30 nav/comm and the SL40 comm.
NOte: For additional information refer to the SL30 nav/comm or the SL40
comm installation manual.
cautiON: This interface does not have an FAA installation airworthiness
approval. If any abnormalities with SL 30/40 tuning or operation are
encountered, disconnect the GPSMAP 695/696 from the SL 30/40 tuning
interface.
Output frequency data to an Sl40/Sl30 nav/comm radio:
1) Connect the Data Out pin on the GPSMAP 695/696 to the RxD pin on the
comm radio. (You do not need to connect the comm radio to the GPSMAP
695/696's Data In pin.)
2) Press the MENU Key twice to access the Main Menu.
3) Select 'System Setup...' and press the ENT Key.
4) Select 'Interface' and press the ENT Key.
148
GPSMAP 695/696 and Power/Data Connector
Garmin GPSMAP 695/696 Owner's Manual
Power/Data
Connector
190-00919-00 Rev. D