Turning The Unit On/Off - Garmin GPSMAP 695 Owner's Manual

Overview
NOTE: While in Charge Mode, the unit draws a current from the aircraft. To
avoid discharging the aircraft's battery, disconnect the external power cable
from the unit when not in use for several days.

turNiNG the uNit ON/OFF

Press and hold the POWER Button to turn the unit on or off.
The first time the unit is turned on, the receiver must collect satellite data and
establish its present location. To ensure proper initialization, the GPSMAP 695/696 is
shipped from the factory in AutoLocate mode, which allows the receiver to "find itself"
anywhere in the world.
During initialization, current database information is displayed. Database information
includes valid operating dates, cycle number, and database type. When this information
has been reviewed for currency (to ensure that no databases have expired), the pilot
is prompted to continue.
Pressing the ENT Key acknowledges this information, and the MAP Page is
displayed.
4
Database Initialization
Garmin GPSMAP 695/696 Owner's Manual 190-00919-00 Rev. D