Gps Navigation - Garmin GPSMAP 695 Owner's Manual

GPS Navigation

The graphic HSI depicts the course to the destination or the next waypoint in a flight
plan, current ground track, off course error, and a To/From indication. The rotating
compass indicates your current ground track at the top of the page.
The course pointer and course deviation needle indicate the course and whether you
are on the course. The Bug Indicator can be set to 'Bearing' (default), 'Course to Steer',
a specific heading reference ('User Selected'), or 'Off'.
Bearing is the compass direction from the present position to a destination waypoint.
Course to Steer is the recommended direction to steer in order to reduce cross-track
error and return to the course line.
The Course Deviation Indicator, or needle, indicates how far off course, left or right,
based on its placement along the course deviation scale.
The course deviation scale setting is adjustable for Auto, ±0.25, 1.25 or 5.0 (nautical
mile, statute mile, or kilometer) full-scale deflection. The course deviation scale appears
on the lower right corner of the HSI. The default setting is Auto, which uses three
factors to determine the distance from the center of the CDI to full left or right limits:
• CDI scale = 1.25 - within 30 nm of any airport in the active route.
• CDI scale = 0.25 - on an approach leg or within 2 nm of the FAF or MAP.
• CDI scale = 5.0 - if the previous two conditions do not exist.
Displaying the panel on the map page:
From the Map Page press the PANEl Softkey.
Or:
1) From the Map Page press the MENU Key to display the Map Page Menu.
2) Turn or move the FMS Joystick to highlight 'Select Page Layout' and press
the ENT Key.
3) Turn or move the FMS Joystick to highlight 'Map with Panel' and press the
ENT Key.
34
Garmin GPSMAP 695/696 Owner's Manual 190-00919-00 Rev. D