Airspace Messages - Garmin GPSMAP 695 Owner's Manual

appendix a
• Route Already Exists—a route name that already exists has been entered.
• Route Memory Full—no additional routes can be saved.
• Route Truncated—uploaded route from another device has more than 300
waypoints.
• Route Waypoint Memory Full—no additional route waypoints can be saved.
• Saving XM Program Information—an XM Radio channel lineup change has
occurred and the unit is saving the channel lineup to memory.
• Steep Turn—approaching a turn that requires a bank angle in excess of 25 degrees
to stay on course.
• Track Already Exists—a saved track with the same name already exists.
• Track Log Full—the track log is full and track recording was turned off. To record
more track points, you need to clear the track log and turn track recording on.
• Track Memory Full—no more track data can be stored. Delete the old track data
to store the new data.
• Track Truncated—a complete uploaded track will not fit in memory. The oldest
track log points have been deleted.
• Transfer Complete—data transfer was completed.
• VNAV Cancelled—VNAV function has been cancelled due to a change in the
active route.
• Waypoint Already Exists—a waypoint with the same name already exists.
• Waypoint Memory Full—the unit has stored the maximum number of waypoints.
• XM Antenna Not Responding—the unit is unable to communicate with the GXM
40.

airSPace MeSSaGeS

• Inside Airspace—inside the boundaries of the airspace.
• Airspace Near and Ahead—within two nautical miles of an airspace and your
current course takes you inside the airspace.
134
Garmin GPSMAP 695/696 Owner's Manual 190-00919-00 Rev. D