Airport Approach Page Options - Garmin GNS 530AW Pilot's Manual & Reference

6 - WPT PAGES
Airport Approach Options
NOTE: Not all approaches in the database are ap-
proved for GPS use. As you select an approach, a
G
" " designation to the right of the procedure name
P
S
indicates the procedure can be flown using the GPS re-
ceiver. Some procedures do not have this designation,
meaning the GPS receiver may be used for supple-
mental navigation guidance only. ILS approaches, for
example, must be flown by tuning the VLOC receiver to
the proper frequency and coupling the VLOC receiver to
the external CDI (or HSI).
130

Airport Approach Page Options

The following options are available for the Airport
Approach Page, by pressing the MENU key:
Load into Active FPL? allows you to load the
selected approach into the active flight plan —
without activating it. This performs the same
operation as selecting "Load?" from the Procedures
Page "Select Approach?" option.
To load an approach from the Airport Approach
Page:
1. Select the desired approach and transition.
2. Press MENU to display the Airport Approach
Page Options.
From the Airport Approach Page, press MENU to display an op-
tions list. Select "Load into Active FPL?" to load the approach
Turn the large right knob to highlight "Load
3.
into Active FPL?" and press ENT.
4. The Active Flight Plan Page appears. Press FPL
to return to the Airport Approach Page.
Load and Activate? allows you to load the
selected approach into the active flight plan and
activate navigation guidance to the approach
transition.
190-00357-00 Rev G
for later use.