Select Departure; Remove Approach, Arrival, Or Departure - Garmin GNS 530AW Pilot's Manual & Reference

4 - FLIGHT PLANS
Active Flight Plan Options

Select Departure

Select Departure? allows you to select a pub-
lished standard instrument departure (SID) for the
departure airport, or replace the current departure
with a new selection. When using a direct-to, the
500W-series unit uses the nearest airport as a refer-
ence when displaying available departures. (See
Section 5 - Procedures for information on selecting
departures using the PROC key.) Departures are
not available for all airports, in which case the
departure windows will show "NONE."
To select a departure for the departure airport:
1. From the Active Flight Plan Page, press
MENU to display the Active Flight Plan Page
Options.
2. Highlight the "Select Departure?" option from
the Active Flight Plan Page Options and press
ENT.
3. A window appears listing the available depar-
tures for your departure airport. Turn the small
right knob to select the desired departure and
press ENT.
4. A second window appears listing available
transitions for the departure. Turn the small
right knob to highlight the desired transition
waypoint and press ENT.
5. A third window appears listing available run-
ways for the departure. Turn the small right
knob to highlight the desired runway and press
ENT.
With "Load?" highlighted, press ENT. The
6.
departure is now inserted into your flight
plan.
74

Remove Approach, Arrival, or Departure

Remove Approach? deletes the currently selected
approach from the active flight plan. Remove Arrival?
deletes the current Arrival (STAR) from the active
flight plan. Remove Departure? deletes the current
departure (SID) from the active flight plan.
To remove an approach, arrival or departure from
the active flight plan:
1. Press MENU and turn the large right knob
to select the "Remove Approach?", "Remove
Arrival?" or "Remove Departure?" option from
the active flight plan page options and press
ENT.
Approaches, arrivals and departures can all
be removed from the active flight plan by
selecting the corresponding "Remove..."
To remove an approach, arrival or departure from
the active flight plan:
1. From the Active Flight Plan Page, press MENU
to display the Active Flight Plan Page Options.
2. Select the "Remove Approach?", "Remove
Arrival?" or "Remove Departure?" option and
press ENT.
3. A confirmation window appears listing the pro-
cedure you are about to remove. With "Yes?"
highlighted, press ENT.
190-00357-00 Rev G
option.