Airport Approach Page Options - Garmin GNC 420 Pilot's Manual & Reference

Not all approaches in the database are approved for GPS use. As
you select an approach, a "
cedure name indicates the procedure can be flown using the GPS
receiver. Some procedures will not have this designation, meaning
the GPS receiver may be used for supplemental navigation guidance
only. ILS approaches, for example, must be flown by tuning the
external VLOC receiver to the proper frequency and following the
CDI or HSI.

Airport Approach Page Options

The following options are available for the airport approach page, by pressing
m
the key:
Load into Active FPL? allows you to load the selected approach into the active
flight plan—without activating it. This performs the same operation as selecting
"Load?" from the procedures page "Select Approach?" option. See page 66.
To load an approach from the airport approach page:
1. Select the desired approach and transition using the steps outlined on page 94.
2. Press to display the airport approach page options.
m
3. Rotate the large right knob (
4. The active flight plan page will appear. Press
Load and Activate? allows you to load the selected approach into the active flight
plan and activate navigation guidance to the approach transition. See page 67.
To load and activate an approach from the airport approach page, follow the steps
above, but select "Load and Activate?" in step #3.
G P
" designation to the right of the pro-
S
d
) to highlight "Load into Active FPL?" and press
to return to the airport procedures page.
F
.
E
WPT PAGES
Airport Approaches
6
95