Date / Time; Display Backlight - Garmin GNS 530AW Pilot's Manual & Reference

9 - AUX PAGES
Setup 1 Page

Date / Time

To display local time or UTC:
1. Select "Date / Time" from the Setup Page.
2. The flashing cursor highlights the "Time
Format" field. Turn the small right knob to
display a window of available time formats:
Local 12hr, Local 24hr, or UTC.
3. Continue turning the small right knob to
select the desired time format.
Press ENT to accept the selection.
4.
To set the local time:
1. Select "Date / Time" from the Setup Page.
2. Turn the large right knob to highlight the
time offset field.
Use the small and large right knobs to enter the
3.
desired offset, beginning by entering a minus (-) or
plus (+) sign to indicate whether the offset is
behind UTC or ahead of UTC. (In the United
States, all local time offsets are minus, or
behind UTC.)
188
4. Press ENT to accept the selected offset.
NOTE: When a local time offset is entered, you
must also select "Local 12 hour" or "Local 24
hour" time format. The "UTC" time format setting
ignores any time offset entry.

Display Backlight.

To change the backlighting intensity:
1. Select "Display Backlight" from the Setup
Page.
2. The flashing cursor highlights the backlight
"Mode" field. Turn the small right knob to
select the desired mode: Auto or Manual. Press
ENT to accept the selection.
3. If "Manual" is selected, the flashing cursor
moves to the backlight "Level" field. Turn the
small right knob to select the desired level.
Press ENT to accept the selection.
190-00357-00 Rev G