Dual Navigation Databases; Automatic Database Synchronization - Garmin Cirrus Perspective SR20 Cockpit Reference Manual

Garmin integrated avionics system reference guide
Hide thumbs Also See for Cirrus Perspective SR20:
Table of Contents

Advertisement

dual navigation databases

The dual navigation database feature allows each display to store an upcoming
navigation database on the bottom SD card so that the system can automatically load it
to replace the active database when the new database becomes effective (the next cycle
becomes available seven days prior to its effective date).
Uploading the standby database to the active location takes approximately 45-55
seconds.
loading a navigation database
1) With the system OFF, insert the SD card containing the navigation database
update into the top card slot of the PFD or MFD.
2) Verify that an SD card is inserted in the bottom slot.
3) Turn the system ON.
4) At the prompt, if it is desired to update the standby navigation database on
the bottom SD card, press the YES Softkey and proceed to step 6. If it is
desired to update the active navigation database, press the NO Softkey and
proceed to step 5.
5) At the next prompt, press the YES Softkey to update the active navigation
database.
6) After the update, the display starts in normal mode.
7) Repeat steps 1-6 for the remaining display.
8) Verify the effectivity of the active navigation database in the PFD and the
MFD on the AUX-System Status Page.

automatiC database synChronization

The automatic database synchronization feature automatically transfers the database
from a single SD database card to the SD cards on the PFD or the MFD to ensure that all
databases are synchronized throughout the system. After power-up, the Perspective
system compares all copies of each applicable database. If similar databases do not
match, the most recent valid database is automatically copied to the other card in the
system that does not already contain that database.
NOTE: The 9-arc second terrain database may take as long as 100 minutes to
synchronize using this method. Therefore the user may want to transfer the data
using a PC, or connect the Perspective
190-00821-03 Rev. A
Cirrus Perspective
®
system to a ground power source while
®
by Garmin – Cockpit Reference Guide for the SR20/SR22
appendix
®
103

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cirrus perspective sr22

Table of Contents