Section 2: Direct-To Navigation - Garmin GPS 400 Pilot's Manual And Reference

Section 2
Direct-To Navigation
The GPS 400's direct-to function provides a quick method of setting a course to a
destination waypoint. Once a direct-to is activated, the GPS 400 will establish a
point-to-point course line (great circle) from your present position to the selected
direct-to destination. Navigation data on the various NAV pages will provide steer-
ing guidance until the direct-to is cancelled or replaced by a new destination.
To select a direct-to destination:
D
a
E
If you're navigating to a waypoint and get off course, the direct-to function may
also be used to re-center the CDI (HSI) needle and proceed to the same waypoint.
To re-center the CDI (HSI) needle to the same destination waypoint:
D
If you're navigating an approach with the missed approach point
(MAP) as the current destination, re-centering the CDI (HSI) needle
D
with the key will cancel the approach.
d
E
E
DIRECT-TO
Selecting a
Destination
2
Œ
a

Ž