Insert A Waypoint In The Active Flight Plan; Enter An Airway In A Flight Plan - Garmin Cirrus Perspective SR20 Cockpit Reference Manual

insert a Waypoint in the aCtive Flight plan

1) Press the FPL Key on the Control Unit to display the active flight plan.
2) If necessary, press the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to highlight the desired flight plan waypoint. The
new waypoint is inserted before the highlighted waypoint.
4) Turn the small FMS Knob. The Waypoint Information Window is now
displayed.
5) Enter the new flight plan waypoint by one of the following:
a) Enter the user waypoint identifier, facility, or city.
b) Press the ENT Key.
Or:
a) Turn the small FMS Knob to the left. Initially, a flight plan waypoint list
is displayed.
b) Turn the small FMS Knob to the right to display the 'NRST' airport
waypoints to the aircraft's current position.
c) Turn the large FMS Knob to select the desired waypoint.
d) Press the ENT Key.
Or:
a) Turn the small FMS Knob to the left. Initially, a flight plan waypoint list
is displayed.
b) Turn the small FMS Knob to the right to display the 'RECENT'
waypoints.
c) Turn the large FMS Knob to select the desired waypoint.
d) Press the ENT Key.
e) Press the ENT Key again to "accept" the waypoint.

enter an airWay in a Flight plan

1) Press the FPL Key on the Control Unit.
2) Press the FMS Knob to activate the cursor (not required on the PFD).
3) Turn the large FMS Knob to highlight the waypoint after the desired airway
entry point. If this waypoint is not a valid airway entry point, a valid entry
point should be entered at this time.
190-00821-03 Rev. A Cirrus Perspective ® by Garmin – Cockpit Reference Guide for the SR20/SR22
Flight planning
35