Flight Instruments; Selecting The Altimeter Barometric Pressure Setting; Selecting Standard Barometric Pressure; Change Altimeter Barometric Pressure Setting Units - Garmin Cirrus Perspective SR20 Cockpit Reference Manual

seleCting the altimeter barometriC pressure setting

Turn the BARO Knob to select the desired setting.

seleCting standard barometriC pressure

Press the BARO Knob.

Change altimeter barometriC pressure setting units

1) Press the PFD Softkey to display the second-level softkeys.
2) Press the ALT UNIT Softkey.
3) Press the IN Softkey to display the barometric pressure setting in inches of
mercury (in Hg).
Or:
Press the HPA Softkey to display the barometric pressure setting in
hectopascals.
4) Press the BACK Softkey to return to the top-level softkeys.

Change navigation sourCes

1) Press the CDI Softkey to change from GPS to VOR1 or LOC1. This places
the light blue tuning box over the NAV1 standby frequency in the upper left
corner of the PFD.
2) Press the CDI Softkey again to change from VOR1 or LOC1 to VOR2
or LOC2. This places the light blue tuning box over the NAV2 standby
frequency.
3) Press the CDI Softkey a third time to return to GPS.

enable/disable obs mode While navigating With gps

1) Press the OBS Softkey to select OBS Mode.
2) Turn a CRS Knob to select the desired course to/from the waypoint. Press
the CRS Knob to synchronize the Selected Course with the bearing to the
next waypoint.
3) Press the OBS Softkey again to disable OBS Mode.
190-00821-03 Rev. A Cirrus Perspective

Flight instruments

® by Garmin – Cockpit Reference Guide for the SR20/SR22
Flight instruments
1