Selecting A Nav Radio; Nav/Com Tuning; Intercom System (Ics) Isolation - Garmin Cirrus Perspective SR20 Cockpit Reference Manual

nav/Com/xpdr/audio panel

seleCting a nav radio

1) To begin navigating using a navigation radio, press the CDI Softkey on the
PFD to select VOR1/LOC1 (NAV1) or VOR2/LOC2 (NAV2).
2) Press the NAV1 , NAV2 , DME , or ADF Key on the audio panel to select or
deselect the navigation radio audio source. All radio keys can be selected
individually or together.

nav/Com tuning

1) Turn the respective tuning knobs to enter the desired frequency into the
standby frequency field. The large knob enters MHz and the small knob
enters kHz.
2) Press the appropriate Frequency Transfer Key to place the frequency into
the active frequency field.
Or:
1) Press the COM or NAV Key on the PFD/MFD Control Unit to select the
desired COM or NAV frequency box.
2) Turn the FMS/XPDR COM/NAV Knob to tune the desired frequency (large
knob for MHz; small knob for kHz).
3) Press the Frequency Transfer Key to transfer the frequency to the active field.

interCom system (iCs) isolation

Press the PILOT and/or COPLT Key on the audio panel to select those isolated
from hearing the Nav/Com radios and music.
14
Cirrus Perspective by Garmin – Cockpit Reference Guide for the SR20/SR22
® 190-00821-03 Rev. A