Setting Up Graph Displays - Furuno RD-30 Operator's Manual

1. OPERATION
5. Use the cursor pad to select "A" and then press the [ENT] key. The data
available for display is shown.
6. Select data desired and then press the [ENT] key. (All data require
appropriate sensors.)
NONE:
TEMP:
DEPTH: Depth
SOG:
STW:
HDG:
COG:
XTE:
WIND:
ODO:
TRIP:
CUR:
POSN:
TD:
TIME:
WPT:
ROT:
TIMER:
POWER: Power source voltage
CUR:
PRE:
A-TEMP: Atmosphere temperature
HUM:
ETA:
7. For 2-, 3- and 4-indication displays repeat step 5-6 to select data as
appropriate.
Note 1: A digital display shows bars (-) where corresponding data is not
Note 2: ETA display requires the sentences ZDA and ZTG or ZTG and RMC.
8. Press the [MENU] key twice to close the menu.
1.5.3

Setting up graph displays

1. Select GRAPH referring to paragraph 1.5.1.
2. Press the [ENT] key to show the graph display options window.
1-10
NONE
TEMP
DEPTH
SOG
STW
HDG
COG
XTE
Digital display options
No display
Water temperature
Speed over ground
Speed through water
Heading
Course over ground
Cross-track error
Wind speed and direction
Odometer
Trip distance
Current (tide)
Position in latitude and longitude
Position in Loran C or Decca TDs
Date and time
Waypoint (selected at navigator)
Rate of turn
Remaining time for time alarm
Current (tide) speed and direction
Atmospheric pressure
Humidity (relative or absolute)
Estimated Time of Arrival (at destination waypoint)
available or input is lost.
WIND TIMER
ODO POWER
CUR
TRIP
POSN PRE
TD A-TEMP
TIME HUM
NONE
WPT
ROT ETA