Applying An Offset To Data - Furuno RD-30 Operator's Manual

1. OPERATION
1.10

Applying an Offset to Data

An offset may be applied to speed, water temperature, depth and wind data to
refine their accuracy. Further, you can use local time by entering the time
difference between it and UTC time.
1. Press the [MENU] key once or twice to display the main menu.
2. Select OFFSETS and then press the [ENT] key.
3. Select appropriate item and then press the [ENT] key.
4. Use the cursor pad to enter an offset: Use ◄ or ► to select location, press ▲
or ▼ to enter value and switch from plus to minus and vice versa.
5. Press the [ENT] key.
6. Press the [MENU] key twice to close the menu.
1-24
OFFSETS
TIME DIFF : +00:00
SPEED (SOG): +0.0KT
SPEED (STW): +0.0%
°
TEMP : +0.00 F
DEPTH : +0.0FT
°
WND DIRECT : +0.0
WND SPEED : +0.0KT
Offsets menu