Arrival Alarm, Anchor Watch Alarm - Furuno RD-30 Operator's Manual

1. OPERATION
1.7.5

Arrival alarm, anchor watch alarm

The arrival alarm informs you that your boat is approaching a destination
waypoint. The area that defines an arrival zone is that of a circle which you
approach from the outside of the circle. The alarm will be released if your boat
enters the circle.
The anchor watch alarm informs you that your boat is moving when it should be
at rest.
The arrival alarm and anchor watch alarm cannot be activated together. RMB,
BWR or BWC data sentence required for these alarms.
Alarm
setting
Your ship's position
where you start the
anchor watch alarm.
Anchor watch alarm
1. Press the [MENU] key once or twice to show the main menu.
2. Select ALARM2 and then press the [ENT] key.
3. Select ARV/ANC and then press the [ENT] key to show the arrival
alarm/anchor watch alarm options window.
1-18
Own ship
: Alarm
area
How the arrival alarm works
ARV/ANC :
XTE : OFF
TRIP : OFF
ODOMETER: OFF
TIME : OFF
COUNTDOWN: OFF
ALARM2 menu
Arrival/anchor watch alarm options window
: Alarm area
Arrival alarm
ALARM2
OFF 0.50NM
0.25NM
0NM
0NM
00:00
5MIN
OFF
ARV
ANC
Alarm
range
Destination
waypoint