Table of Contents
Advertisement
To adjust the tone of the printout
You can adjust the tone so that the details in the
white or black areas of the source image are
sharply defined in the print.
Display the [Print Setup] tab of [User Setup]
screen, use the or button to select [Color
Tone], then adjust the intermediate colors with
[Gamma].
Color Tone
Back
Cyan-Red
Magenta-Green
Yellow-Blue
Dark
Light
Sharpness
Gamma
Option
Description
Soft
Select this to make a printout of a source
image with a lot of white areas. (soft tone)
Normal
Select this to make a printout of a normal
(default
source image.
value)
Hard
Select this to make a printout of a source
image with a lot of black areas. (hard tone)
When a black frame or lines show
up on printouts
When you print an image that is narrower or wider
than the standard screen size, a black frame may
be printed or the image may be partially cut.
Or, a black line may show up on the printout even
though it does not appear on the video monitor.
This happens when areas without a video signal
are captured to memory, and is caused by
changing the connected equipment or changing
the playback software.
If this happens, adjust the image position and
size.
These adjustment change the printing area of
images already captured to memory. You do not
need to capture the images again.
0
0
0
0
0
8
Normal
End : MENU
59
1
Display the [Print Area Setup] tab of [User
Setup] screen, use the or button to select
[General Range], then press the button.
User Setup
Print Area
Save
Setup
User Setup
General Range
Zoom Mode
Zoom Area
Zoom Position
Zoom Range (Small)
Zoom Range (Large)
The [General Range] screen appears.
2
Adjust the captured image position according
to the printout.
The selected range of the setting value may
differ depending on the aspect ratio of the
input signal.
Select the desired item, then perform the adjustment.
General Range
Back
Aspect Ratio
H Start
V Start
H Width
V Width
Resize To Fit
Aspect
Setting
ratio
item
SD (480i)
H Start
V Start
H Width
V Width
Initialize
User Setup
Part
Small
Upper Left
End : MENU
16:9
0
0
1920
1080
On
End : MENU
Setting
Default
range
value
0 to 72
0
0 to 48
0
560 to 720
720
400 to 480
480
Advertisement
Table of Contents
