Displaying The Ink Ribbon Or Printer Setting Information; Disabling Message Display; Selecting Controls Using The Device Connected To The Remote Connector - Sony UP-27MD Instructions For Use Manual

2
Select [All Reset], then press the EXEC button.
Maintenance
Backup Initialize
All Reset
"All Reset" appears and all setting values on
the printer are returned to factory defaults.
Displaying the ink ribbon or printer
setting information
You can keep information such as the ink ribbon
type and remaining amount, set number of prints,
and reduced image settings on the video monitor
at all times.
Note
Use the remaining ribbon display as a guideline.
1
Display the [Output Setup] tab of the [User
Setup] screen.
2
Select [Information Display] and choose
whether or not to display information.
Option Description
All (default Displays printer setting information
value) (ink ribbon remaining prints,
captions, number of prints, current
memory pages, number of reduced
images, source/memory), and the
pointer (next position to capture).
Ribbon Displays only ink ribbon information
Remain (type and remaining level).
Off Turns off all printer setting
information.
Cleaning
[EXEC]
End : MENU
Ink ribbon type and remaining prints
1 A

Disabling message display

You can configure settings so messages are not
displayed on the video monitor.
1
Display the [Output Setup] tab of the [User
Setup] screen.
2
Select [Messages Display] and choose
whether or not to display messages.
Option Description
On (default Displays messages.
value)
Off Hides messages.
Selecting controls using the device
connected to the REMOTE
connector
You can control the printer remotely using the
FS-24 Foot Switch (not supplied) connected to the
REMOTE connector on the rear panel of the
printer.
In [Remote Function] on the [Remote Setup] tab of
the [System Setup] menu, assign controls to the
foot switch connected to the REMOTE connector.
In addition, the printer can be remotely controlled
by a pulse signal input sent to the REMOTE
connector (page 78).
You can also control the printer remotely by
connecting a computer to the RS-232C connector.
71
S 4 50
Remaining
prints
Ink ribbon type
S: UPC-21S
L: UPC-21L
C: Cleaning ribbon