Table of Contents
Advertisement
If you have already adjusted the color
balance, the previously adjusted values are
displayed.
Currently setting values of X and Y axes and the amount
of change between color balance items ([Bal Step])
(example is factory default settings)
Color Balance
Back
Bal X
Bal Y
Bal Step
Test Print
To reset the values to the factory default
setting (50/50/5)
Align the cursor with each item and press the
and buttons at the same time.
2
Press and hold the DISPLAY button and use
the , , , or button to decide the area
where you want to adjust the color balance.
(The [Color Balance] screen disappears
temporarily.)
3
Press the CAPTURE button.
The image captured in memory appears.
Color Balance
Back
Bal X
50
Bal Y
50
5
Bal Step
[EXEC]
Test Print
End : MENU
1
A
50
50
5
[EXEC]
End : MENU
M
4
50
4
Select [Test Print], then press the EXEC button.
Nine identical images from the area selected
in step 2 are printed.
Each image has a different color balance.
(This print operation can also be performed by
pressing the PRINT button while the [Color
Balance] screen is displayed.)
Color changes in the test print are as follows.
Yellowish
green
Greenish
Bluish green
5
Select the image which has the best color
balance from the printed results.
If you want to change the color balance after
you see the printout, adjust the color balance
again, referring to "To readjust the color
balance" (page 63).
62
Yellowish
Orangish
Standard
Reddish
Reddish
Bluish
purple
Advertisement
Table of Contents
