Table of Contents
Advertisement
To return from the sub menu:
Select [ Back] on the top, then press the
button.
Use the or button to highlight [ Back],
then press the button.
Color Tone
Back
Cyan-Red
Magenta-Green
Yellow-Blue
Dark
Light
Sharpness
Gamma
Color Tone
Back
Cyn-Red
Press the or button to move the cursor box until
[ Back] is displayed, then press the button.
To return the values to factory setting
Simultaneously press the and buttons
for the selected setting item in the screen
display and printer window display to return
the setting to factory default values.
0
0
0
0
0
8
Normal
End : MENU
0
Adjusting the Color and
Sharpness
Compensating for source image
brightness, etc.
If the screen brightness is inadequate due to an
improper input signal level, you can compensate
for the source image input signal.
Note
You cannot correct images that have already been
captured to memory. Capture the image to
memory after compensation is complete.
Check
When the memory image is displayed on the
video monitor, press the SOURCE/MEMORY
button to display the image from the video
source.
1
Display the [Input Setup] tab of the [System
Setup] screen, use the or button to select
[Video Adjustment], then press the button.
System Setup
Remote
Color
Setup
Correction
HD Aspect Ratio
Video Adjustment
Input Signal
The [Video Adjustment] screen appears.
55
Input
Monitor
Setup
Color Tone
16:9
Auto
End : MENU
Advertisement
Table of Contents
