Items That Can Be Set On Menus - Sony UP-27MD Instructions For Use Manual

Items That Can be Set on
Menus
You can use the menu screen to set up the print to
meet various specifications. If you store the
adjustments to memory, they are retained even
after the printer is turned off, and will continue
functioning at these settings until new
adjustments are stored to memory.
You can set up the printer according to connected
equipment or your individual preferences. You can
store up to 10 sets of user settings.
Functions that can be set on the menu screen are
as follows:
Tip
Adjustment values that can be stored to memory
are the items found in the [User Setup] menu.
[User Setup] menu
Tab Functions that can be set
Function How to delete images stored
Setup to memory (Clear Button)
Fill in memory page gaps
when deleting images (Clear
Function)
Selecting the image which
appears after storing the
image into memory, the
source image or the memory
image (Auto Live)
Output Ink ribbon or printer setting
Setup information display
(Information Display)
Show/hide messages
(Messages Display)
Selecting the output signal
from the printer (Source
Image)
Tab
Print Setup
Print Area
Setup
Reference
page
43
44
[System Setup] menu
32
Tab
Remote
Setup
71
71
56
Color
Correction
Input Setup
Monitor
Color Tone
51
Functions that can be set
Selecting the type of printout
(Multi Picture)
Selecting whether or not white
frames are added to multiple
reduced images (White
Frames)
Entering a caption (Caption,
Caption Edit)
Adjusting the printout color,
contrast, sharpness, and tone
(Color Tone)
Setting the print quantity
(Print Quantity)
Selecting the print speed
(Print Speed)
Adjusting the printed image
area to eliminate black lines or
frames produced on the
printout (General Range)
Zoom and print an image
(Zoom Mode)
Setting the image zoom range
(Zoom Area)
Setting the image zoom
position (Zoom Position)
Setting the image zoom size
(Zoom Range)
Functions that can be set
Setting the operation method
of the device connected to the
REMOTE connector (Remote
Function)
Setting the baud rate for
computer communication with
the printer (Baudrate)
Adjusting the color balance
(Color Balance)
Adjusting printout colors
(specify colors for adjustment)
(HSV)
Selecting the HD signal aspect
ratio (HD Aspect Ratio)
Compensating for source
image color (Video
Adjustment)
Selecting the input signal
(Input Signal)
Matching the video monitor
color to the printout color
(Cyan-Red, Magenta-Green,
Yellow-Blue)
Reference
page
31
34
36
58
28
26
59
38
41
42
41
Reference
page
71
73
61
64
69
55
22
56