Table of Contents
Advertisement
Loading the Ink
Ribbon
Note
When using the printer for the first time, the
thermal head may be set to its transport position.
Be sure to turn on the printer and release the
thermal head from its transport position before
removing the ribbon tray. Do not open the ribbon
door panel if "Please Wait" appears on the printer
window display.
1
Open the ribbon door panel.
2
Pull the ribbon tray straight out of the printer.
3
Load the ink ribbon.
Align the two pegs on each side of the ink
ribbon with the slots on the ribbon tray.
Notes
• Make sure to load the ink ribbon with the
front and back oriented correctly.
Correct
• Before loading the ink ribbon, make sure to
position the start mark as shown in the
illustration and remove any slack by turning
the gear in the direction of the arrow.
Gear
Slide the ink ribbon straight into the
ribbon tray until completely inserted.
18
Incorrect
Start mark
Advertisement
Table of Contents
