Table of Contents
Advertisement
To readjust parameter values
If the desired parameter values were not obtained
in step 8 of "Specifying colors for adjustment"
readjust the parameters.
You can also fine tune adjustment following the
same procedures.
1
Display the parameter values that are most
appropriate from the printed images using
the or button.
In this case, you can either fine tune or make
coarse adjustments by changing the value of
[Step].
To make fine tune adjustments
To make fine tune adjustments within the
current parameter range, reduce the current
[Step] value.
HSV
Back
Color Sel
Intensity
Saturation
Value
Hue
Split9
Step
Test Print
The HSV test print will appear as follows
when [Step] is set to 1.
Red [R-Y]
8
0
0
0
I
1
[EXEC]
End : MENU
To make coarse adjustments
To make adjustments beyond the current
parameter range, increase the current [Step]
value.
HSV
Back
Color Sel
Intensity
Saturation
Value
Hue
Split9
Step
Test Print
The HSV test print will appear as follows
when [Step] is set to 4.
2
Repeat steps 2 to 7 in "Specifying colors for
adjustment" to make a printout.
3
Select the most appropriate image from the
printed images.
If there are no appropriate images, repeat
steps 1 and 2 until you have obtained the best
parameter.
4
Go back to step 8 in "Specifying colors for
adjustment".
68
Red [R-Y]
8
0
0
0
I
3
[EXEC]
End : MENU
Advertisement
Table of Contents
