Table of Contents
Advertisement
3
Use the or button to select the [Input
Setup] tab (), then the or button to
select [Input Signal] ().
System Setup
Remote
Color
Setup
Correction
HD Aspect Ratio
Video Adjustment
Input Signal
4
Use the or button to select the input
signal format.
System Setup
Remote
Color
Setup
Correction
HD Aspect Ratio
Video Adjustment
Input Signal
Option
Description
Auto (default
Automatically detects the input
value)
signal format.
For details, see "Supported signal
formats" (page 23).
1080p
Locks the source image to
"1080p."
1080i
Locks the source image to "1080i."
SD
Locks the source image to "SD."
Input
Monitor
Setup
Color Tone
16:9
Auto
End : MENU
Input
Monitor
Setup
Color Tone
16:9
Auto
End : MENU
Notes
• You cannot mix an HD video signal image
and SD video signal image on the same
memory page.
• Before switching the input signal, make sure
to check that there are no unprinted images.
If you have captured an image before
switching the input signal then capture a
new image, the old image will be
overwritten.
5
Press the MENU button.
The [System Setup] screen is closed.
Supported signal formats
Supported signal formats
480/59.94i
576/50i
720/59.94p
720/60p
720/50p
1080/59.94i
1080/60i
1080/50i
1080/59.94p
1080/60p
1080/50p
: Supported
: Not supported
The SDI signal complies with SD: SMPTE ST 259/
HD: SMPTE ST 292-1/3G: SMPTE ST 424.
For information on the relation between the input
signal format and output signal, see "Input signal
format and output signal relation" (page 80).
23
Input connector
Advertisement
Table of Contents
