Adjusting The Color - Sony UP-D77MD Instructions For Use Manual

Dicom color printer

Hide thumbs

Table of Contents

Enlarged version

Adjust the gray.

When you adjust the gray, the color intensity is also

adjusted. However, adjust the gray first, then adjust

the desired color.

1 Select the item for adjustment by using the F or

f button.

f: Scrolls up to the next item.

F: Scrolls down to the previous item.

2 Adjust the level by pressing the G or g button.

You can adjust the color level for CYN-RED,

MAG-GRN, YEL-BLU, DARK and LIGHT

for the tone, and GAMMA for the half tone

between –32 to +32. The value 0 is the standard

level.

g: Increases the level.

G: Decreases the level.

When you keep the button pressed, the number

changes quickly.

To adjust the color intensity (RED/

GREEN/BLUE)

Item to be

Adjustment

adjusted

CYN-RED

To make an image

reddish

To make an image

cyan

MAG-GRN

To make an image

greenish

To make an image

magenta (pink)

YEL-BLU

To make an image

bluish

To make an image

yellowish

To adjust the contrast

Item to be

adjusted

DARK

LIGHT

Adjusting Printouts

Button to be

pressed

Adjustment

To adjust the dark area of an image

To adjust the light area of an image

To adjust the tone (density gradation)

Item to be

Adjustment

adjusted

GAMMA

To adjust the half tone of printouts

To adjust the sharpness

Item to be

Adjustment

adjusted

SHARPNESS

To adjust the sharpness of printouts

The sharpness can be adjusted between 0 to 3.

Example: To set CYN-RED to +20 toward

RED

Press the g button until "+20" appears.

When you keep the button pressed, the number

changes quickly.

3 After finishing the adjustment of 1 and 2,

press the MENU button to exit the adjustment

mode.

4 Make a printout again.

Repeat your adjustments until the desired gray

level is obtained.

When the desired gray is obtained, go to the

next color adjustment.