Installing The Cveq 100 Aap/Sveq 100 Aap - Extron electronics A-3 User Manual

Installation, cont'd
SVEQ 100 back of the rack installation example
CVEQ 100 and SVEQ 100 Series • Installation
2-10
Inside
Outside

Installing the CVEQ 100 AAP/SVEQ 100 AAP

The CVEQ 100 AAP and SVEQ 100 AAP are double space high
architectural adapter plate products that mount in a wall or
furniture using an optional mounting frame.
1. Remove power from the line driver by disconnecting the
power supply.
2. Attach the mounting frame to wall box.
3. Route output cables through the wall box and frame and
connect them to the line driver.
4. Mount the line driver to the mounting frame with machine
screws, as shown in the following illustration. Take care
not to damage the output cable(s), which fit through the
mounting frame and into the wall box.
Cable
Clamp
#4-40 Nut w/ Captive
Washer
Mounting the line driver to a wall box
5. Reconnect the power supply, cable all products (see
chapter 3), and restore power to the equipment.
CVEQ 100 and SVEQ 100 Series • Installation
AAP 102
Connector
0 2
P 1
A A
DI O IN
AU
A P
R
EO 0 A
VID 1 0
IN E Q
L
C V
Extron
CVEQ 100 AAP
Composite Line Driver
2-11