Table of Contents
Advertisement
Connection and Configuration, cont'd
3.
Configuration using Global Configurator
Global Configurator (GC) is a simple-to-use, yet comprehensive software
application that allows non-programmers to configure a wide range of Extron IP
Link-enabled products. GC provides an integrated environment for defining A/V
control and monitoring system functionality from an easy-to-use graphical user
interface. It's simple enough to be used for configuring a single room controller,
yet powerful enough to facilitate building a Web-based asset management and
remote monitoring system for hundreds of A/V devices in multiple locations.
Serial ports on the IPL T S Series devices can be configured using GC.
Global Configurator is available free from www.extron.com.
To download Global Configurator:
1.
2.
3.
4.
5.
6.
7.
8.
3-8
IPL T S Series • Connection and Configuration
Figure 3-7 — Executing the ARP command
To confirm the new IP address is active, perform a ping command to the new
IP address.
example: C:\>ping 10.13.197.64
If the IP address setting was successful, the device replies 3 or more times:
Reply from <IP address>: bytes=32 time <1ms TTL=64
Open and Internet browser and advance to www.extron.com.
Click the Download tab.
Click the Global Configurator icon.
Click the Download Now button.
Complete the Personal Information form.
Scroll down the page and review any related Technical Bulletins.
Click the Download GCSW2XX.exe button.
Follow the remaining system prompts.
Advertisement
Table of Contents
