Mounting Options; Rack Mounting An Ipl T S Series Interface - Extron electronics IPL T S Series User Manual

Mounting options

All units are easily mounted in a rack, under a desk or podium, or on a projector
mount.
Mounting kits and IPL T S Series device compatibility are shown in the table below.
Mounting Type
Under-furniture mount
Under-furniture mount
Projector mount
Projector mount
Rack mount 1U 9.5" D rack shelf
VersaTools 1U 3.5" D rack shelf
®

Rack mounting an IPL T S Series interface

The following rack mount kits are available:
• PN 60-190-20
• PN 60-190-01
To rack mount an IPL T S Series unit:
1. If present, remove the rubber feet from the bottom of the IPL T S unit.
2. Secure the underside of the unit on the rack shelf with two 4-40 x 3/16"
screws in opposite (diagonal) corners.
3. Install additional unit(s) or blank panel(s) on the rack shelf as desired.
4. Insert the shelf into the rack at the desired location.
5. Secure the shelf to the rack using the supplied mounting screws.
IP L
T S
2
R
1U Rack Shelf
1/4 Rack Width False Front
Use 2 mounting holes on
opposite corners.
Figure 2-1 — Rack mounting the interface on the VersaTools shelf
N Only IP Link
Any 1U or 1-inch high rack-mountable Extron product can be mounted on the
Universal 1U Rack Shelf (shown in the following diagram).
Kit PN
70-077-01
70-212-01
70-077-04
70-217-01
60-190-01
60-190-20
VersaTools 19" 1U Rack Shelf
Universal 1U Rack Shelf
C O
M
1
2
®
10
0 IP L
LI N T S
K
2
A C
T
R
C O
M
1
2
®
10
0
LI N
K
A C
T
Face Plate
IP L
T S
2
R
C O
M
1
2
®
10
0
LI N
K
A C
T
(2) 4-40 x 3/16" Screws
or VersaTools products can be mounted to a VersaTools shelf.
®
IPL T S Series • Installation and Operation
S1 S2 S4 S6
•
• •
•
• •
• • •
• • •
•
•
•
•
2-3