Fault - York YMAA 0045 Installation Manual

FORM NO.: 6U6K-B01E-NB-EN

FAULT

This is for fault readout and reset. There will be an about
6-second delay while entering the interface, caused by the
information reading from the mainboard.
In the lower part of the page, a select box is designed to screen
out the faults needed. If "System" is selected, the system faults
will be displayed. Different module selection is also available
for unit fault display.
Notes
1.Current faults are displayed in blue and history faults in
black;
2.The Unit number will be displayed as 0 if the fault is a
systematic one.
JOHNSON CONTROLS
Cooke Industries - Phone: +64 9 579 2185
Detailed information is accessible by pressing the faults, except
for communication fault between HMI and the units.
Chiller Status
Water Pump
Ambient Temperature
Chiller Return Temperature Load Ratio
Unit Leaving Temperature Ckt1 Suct Temperature
Ckt2 Suct Temperature
Ckt1 Comp2 DPT
Ckt2 Comp2 DPT
Ckt2 Suct Pr
Ckt2 Disch Pr
Ckt2 EEV
Ckt2 Fan Speed
DO16-1
Email: sales@cookeindustries.co.nz
SECTION 7 – OPTIVIEW LT OPERATION
Information – System fault
Opearting Mode
Water Flow Switch
Chiller Leaving Temperature
Information – Unit fault
Ckt1 Comp1 DPT
Ckt2 Comp1 DPT
Ckt1 Suct Pr
Ckt1 Disch Pr
Ckt1 EEV
Ckt1 Fan Speed
Inverter Compressor Speed
VSD Fault Code
Web: www.cookeindustries.co.nz
105