Storage - Siemens SIMOTICS DP Operating Instructions Manual

Comply with the graphic symbols provided on the packaging. Their meaning is as follows:
This
way up
4.5.3

Storage

Storing outdoors
NOTICE
Damage to the motor
Damage can occur if incorrectly stored.
Take all precautions to protect the motor under extreme climatic conditions, e.g. salt-laden and/
or dusty, moist/humid atmospheres.
Choose a dry storage location which is safe from flooding and free from vibration. Repair any
damage to the packaging before putting the equipment into storage if this is necessary to ensure
proper storage conditions. In order to ensure protection against ground moisture, locate
machines, equipment and crates on pallets, wooden beams or foundations. Prevent equipment
from sinking into the ground. Do not impede air circulation under the stored items.
Covers or tarpaulins used to protect the equipment against the weather must not come into
contact with the surfaces of the equipment. Use wooden spacer elements to ensure that air can
circulate freely around the equipment.
Storing indoors
The storage rooms must provide protection against extreme weather conditions. They must be
dry, free from dust, frost and vibration and well ventilated.
Bare metal surfaces
For transport, the bare surfaces (shaft ends, flange surfaces, centering edges) should be coated
with an anti-corrosion agent which will last for a limited amount of time (<6 months). Apply
suitable anti-corrosion measures for longer storage times.
Condensation drain hole
Open any condensation drain holes to drain the condensation depending on the environmental
conditions, every six months at the latest.
1FZ shaft height 280
Operating Instructions, 02/2022, A5E51698698A
Fragile Protect
goods against
moisture
Protect Center of
against gravity
heat
Preparing for use
4.5 Transport and storage
Hand hooks Attach
forbidden here
33