Transport And Storage; Safety Instructions For Transport - Siemens SIMOTICS DP Operating Instructions Manual

Preparing for use

4.5 Transport and storage

Archive the safety and commissioning notes provided in the scope of delivery as well as the
optionally available operating instructions so that these documents are always easily accessible.
The rating plate optionally enclosed as a loose item with the delivery is provided to enable the
motor data to be attached on or near the machine or installation.
4.5 Transport and storage
4.5.1

Safety instructions for transport

Observe the following when carrying out any work on the machine:
• Comply with the general safety instructions (Page 11).
• Comply with the applicable national and sector-specific regulations.
• When using the machine within the European Union, comply with the specifications laid
down in EN 50110‑1 regarding safe operation of electrical equipment.
The information required to correctly attach, lift and transport the machine - such as weight,
center of gravity and attachment points - is provided here:
• Machine dimension drawing and the associated explanations or the technical data
• Transport data
• Rating plate and lifting plate, if available
• Shipping parts list
• Packaging
Danger when incorrectly lifting and transporting
Danger of death, serious injury, or substantial material damage caused by tipping or falling
transported goods. Comply with the following safety instructions:
• All work must be performed with due caution and care.
• Comply with any notes in the shipping papers.
• Carefully comply with all of the handling information and markings on the packages
whenever transporting and putting the equipment into storage according to ISO 780.
• Only use suitable and adequately dimensioned lifting equipment, transport equipment and
industrial trucks.
Danger due to incorrect attachment and lifting
• Ensure that suitable lifting equipment is available.
• Only hoist the goods using the designated hoisting points and/or at marked positions. The
attachment points are not dimensioned for additional loads.
30
1FZ shaft height 280
Operating Instructions, 02/2022, A5E51698698A