9.3.10
O-ring seal
If O-ring seals are present, you should check that they are in perfect condition and that the O-ring
seals are properly seated in the grooves between the components. Replace damaged O-ring
seals.
O-ring seals can be present on the following components, for instance:
• Adapters, tapers
• Entries, glands
• Bearing seals
• End shield seals
• Terminal box sealing
• etc.
1FZ shaft height 280
Operating Instructions, 02/2022, A5E51698698A
Maintenance
9.3 Corrective maintenance
113