Installation; Regulations Of The Customs Union - Eurasian Standard; Rotor; Cooling And Ventilation - Siemens SIMOTICS DP Operating Instructions Manual

Description

3.3 Installation

3.3 Installation
3.3.1

Regulations of the customs union - Eurasian standard

The regulations and standards used as the basis for designing and testing this machine are
stamped on the rating plate. The machine design basically complies with the following
standards:
Table 3-1
Feature
Dimensioning and operating behavior
Procedure for determining the losses and the efficiency
of rotating electrical machines and inspections
Degree of protection
Cooling
Type of construction
Terminal designations and direction of rotation
Noise emission
Integrated thermal protection
Vibration severity grades
Rotating electrical machines - Part 30-2: Efficiency clas‐
sification of variable speed AC motors (IE-code)
IEC standard voltages
3.3.2

Rotor

This series of machines involves low-voltage synchronous motors with permanent magnet
rotors.
3.3.3

Cooling and ventilation

3.3.3.1

General

The machines of this series have a closed primary (internal) cooling circuit and an open
secondary cooling circuit (surface cooling). The surface cooling varies depending on the
version.
22
Applicable general regulations
Standard EAC
EN / IEC 60034-1 GOST R IEC 60034-1
EN / IEC 60034-2-1 GOST R IEC 60034-2-1
EN / IEC 60034-2-2 GOST R IEC 60034-2-2
EN / IEC 60034-2-3 GOST IEC 60034-2-3
EN / IEC 60034-5 GOST IEC 60034-5
EN / IEC 60034-6 GOST R IEC 60034-6
EN / IEC 60034-7 GOST R IEC 60034-7
EN / IEC 60034-8 GOST 26772
EN / IEC 60034-9 GOST IEC 60034-9
EN / IEC 60034-11 GOST 27888
EN / IEC 60034-14 GOST IEC 60034-14
IEC / TS 60034-30-2 GOST IEC / TS
60034-30-2
IEC 60038 GOST R IEC 61800-1
Operating Instructions, 02/2022, A5E51698698A
1FZ shaft height 280