9.5.6
Optional add-on units
Note
Further documents
Observe all of the other documents provided with this machine.
You can find additional operating instructions here: Further documents (Page 118)
9.5.7
O-ring seal
If O-ring seals are present, you should check that they are in perfect condition and that the O-ring
seals are properly seated in the grooves between the components. Replace damaged O-ring
seals.
O-ring seals can be present on the following components, for instance:
• Adapters, tapers
• Entries, glands
• Bearing seals
• End shield seals
• Terminal box sealing
• etc.
1PC1423 roller-table motors SH 112 ... 400
Operating Instructions
Maintenance
9.5 Corrective maintenance
101