Connecting The Signal Cable (For The Computer Employing Adc) - Eizo RadiForce R22 User Manual

English
2-3. Connecting the signal cable (For the
computer employing ADC)
NOTE
• Be sure that the power switches of both the PC and the monitor are OFF.
1.
Plug the signal cable into the connector at the rear of the monitor
and the other end of the cable into the video connector on the PC.
After connecting, secure the connection with the screw-in fasteners.
To Input the Signal Through ADC
Signal Cable (FD-C39, enclosed)
+ ADC-DVI Display Adapter
(Commercially available)
NOTE
• ADC-DVI display adapter is required if the monitor connects to Power Mac G4/
G4 Cube. The adapter is commercially available.
2.
Plug the power cord into the power connector on the rear of the
monitor.
16
2. CABLE CONNECTION
Signal Cable
Power Cord
Connector
Video Output Connector/
ADC
Input Connector
(monitor)/ DVI
PC
•
Power Mac G4
(ADC)