English
2-3. Connecting the Signal Cable
(For the computer employing ADC)
NOTE
Be sure that the power switches of both the PC and the monitor are OFF.
1.
Plug the signal cable into the connector at the rear of the monitor
and the other end of the cable into the video connector on the PC.
After connecting, secure the connection with the screw-in fasteners.
To Input the Signal Through ADC
Signal Cable
Signal Cable (FD-C35/FD-C39,
enclosed) + ADC-DVI Display
Adapter (Commercially
available)
NOTE
ADC-DVI display adapter is required if the monitor connects to Power Mac G4/
G5. The adapter is commercially available.
2.
Plug the power cord into the power connector on the rear of the
monitor.
16
2. CABLE CONNECTION
Power Cord
Connector of the PC
Video Output Connector
ADC
Input Connector (monitor)
/ DVI
PC
Power Mac G4 / G5
(ADC)