Connecting The Signal Cable - Eizo FlexScan P1700 User Manual

2-2. Connecting the Signal Cable

NOTE
Be sure that the power switches of both the PC and the monitor are OFF.
1.
Signal Cable (enclosed)
Signal Cable (enclosed) +
Macintosh Adapter (Optional)
Downloaded from ManualMonitor.com Manuals
Plug the signal cable into the connector at the rear of the monitor
and the other end of the cable into the video connector on the PC.
After connecting, secure the connection with the screw-in fasteners.
Power Cord
Signal Cable Connector of the PC
Video Output Connector /
D-Sub mini 15 pin
Video Output Connector /
D-Sub mini 15 pin
2. CABLE CONNECTION
English
PC
Standard graphics card
Power Macintosh G3
(Blue & White) / Power
Mac G4 (VGA)
Macintosh
13