Connecting The Signal Cable - Eizo FlexScan L365 User Manual

2-2. Connecting the signal cable

NOTE
• Be sure that the power switches of both the PC and the monitor are OFF.
1.
Plug the signal cable into the connector at the rear of the monitor
and the other end of the cable into the video connector on the PC.
After connecting, secure the connection with the screw-in fasteners.
Analog Input
Power Cord
Signal Cable (enclosed)
Signal Cable (enclosed) +
Adapter
Digital Input
Power Cord
FD-C04 (Optional)
•
Video Output
Connector D-Sub
•
mini 15 pin
•
Video Output
Connector D-Sub
Macintosh Adapter (Optional)
15 pin
Video Output
Connector DVI-I
2. CABLE CONNECTION
Standard graphics card
Macintosh G3 (Blue & White) /
G4
Macintosh
Digital Graphics card
FD-C04 (Optional)
English
13