Table of Contents
Advertisement
3.
Lead the power cord and signal cable into the cable holder at rear
of the monitor.
NOTE
The cables are recommended to lead with slight sag for the smooth motion of the
stand and the Portrait/Landscape display.
4.
Plug the other end of the cord into a power outlet.
The monitor's power indicator will flash yellow slowly.
WARNING
Use the enclosed power cord and connect to the
standard power outlet of your country.
Be sure to remain within the rated voltage of the power
cord.Not doing so may result in fire or electric shock.
The equipment must be connected to a grounded main
outlet.
Not doing so may result in fire or electric shock.
Cable Holder
2. CABLE CONNECTION
English
17
Advertisement
Table of Contents
