2. Installation
4
The <Display Setup> menu will appear in the middle of the screen. Press the
buttons to select "Dual Display" and then press
Displaying 10-bit color signals
10-bit color signals can be displayed.
How to set
1
Connect the [SIGNAL1] signal input connector and the computer using the
[DD200DL-BK] signal cable.
After connecting the cable connectors, tighten the screws of the connectors to secure the coupling.
Connectors on the PC
2
Hold down the
3
The <Display Setup> menu will appear in the middle of the screen. Press the
buttons to select "Single Display" and then press
4
The <Signal Selection> menu will appear. Press the
"Single Link/10bit", and press
12
Signal cable
Signal cable (DD200DL-BK)
button and press the
.
.
Connectors on the monitor
SIGNAL1
button.
.
buttons to select