Table of Contents
Advertisement
3. Screen Adjustment and Settings
3-4. Off Timer
The off timer function causes the monitor to automatically enter a power off state after a predetermined amount
of time has lapsed. This function was created to reduce Afterimage characteristics that are particular to LCD
monitors when the monitor screen is left on for a long period without use.
[Procedure]
1.
Select <Off Timer> in the ScreenManager <Others> menu.
2. Select "Enable" and touch the Right and Left directing switches to adjust the operating time (1 to 23 hours).
[Off Timer System]
PC
Operating time (1H - 23H)
Last 15 min. in operating time
Operating time expired
*1
When
is pressed during the advance notice period, the monitor continues to operate for additional 90 minutes.
Extension of operation time can be set without limitation.
[Power Resumption Procedure]
Press
to return a normal screen.
NOTE
• The off timer function works while the PowerManager is active, but there is no advance notice before the monitor's
power is turned off.
3-5. Locking the Settings
Use the "Adjustment Lock" function to prevent any accidental changes.
Buttons that can be locked
Buttons that cannot be locked
[How to lock]
1.
Press
to turn off the unit.
2. Press
again while pressing
The screen is displayed with the adjustment lock.
[How to unlock]
1.
Press
to turn off the unit.
2. Press
again while pressing
The screen is displayed with the adjustment lock released.
20
Monitor
Operation
Advance Notice*1
Power Off
(Enter button) / Adjustments/settings using Adjustment menu
•
•
MODE
(Mode button)
•
+
Display setup
•
(Input Signal Selection button)
•
(Power button)
.
MODE
.
MODE
Power Indicator
Blue
Blue Flashing
Off
(page
11)
Advertisement
Table of Contents
